Basic Things You Should Know About Your Home’s Oil Tank

Home oil tanks are a very important part of every house, if you don’t have one or your oil tank or burner has stopped working efficiently then contact the oil tank and oil burner repair services and get a new one installed.

What Are Home Oil Tanks?

Oil or fuel is used by heating systems like oil burners and heat pumps that are installed in homes to warm up the inner environment of your house during chillier days. So, there has to be a place for the oil or fuel to be stored and that is what home oil tanks are used for. You can fill up the tank according to its capacity and relax for a few days/weeks until the oil runs out and requires a refill.

Types of Residential Oil Tanks

Oil tanks are available in two types and different sizes. You can choose one of the types as per your needs and get it installed in your home. The two types include:

Underground Tanks

The oil tanks that are installed under the ground are known as underground oil tanks. These tanks are hidden below however, there is a pipe opening above the ground from where the oil is poured into the tank to refill it. The usual capacity of underground tanks is for approximately 500-1000 gallons of oil.

The only thing that sometimes causes trouble to the homeowners is that they couldn’t find the location of their buried tank. So, make sure that during the installation, you mark the point so that you never lose it. You can, however, relocate the tank by calling over pros to inspect and find the underground oil tank.

Above-Ground Tanks

These oil tanks are installed outside the house. People living in the areas where utility lines are not available for underground systems, generally use these above-ground oil tanks. These tanks are made of solid and robust materials so that they are not damaged in extreme weather even in storms. Above-ground tanks are smaller in size as compared to the underground tanks having the capacity to store about 275 gallons of oil. But, nowadays, various sizes are available in the market for above-ground tanks that you can choose according to your need.

Materials Used To Make Oil Tanks

Following three materials are usually used to make home oil storage tanks:


Tanks made of fiberglass are normally pretty strong, durable and have a longer lifespan. With fiberglass oil tanks, you won’t have to worry about the tank being rusted or any leakage of oil. This material is used to make both underground and above-ground oil tanks.


Most widely used is the steel oil tanks. These are also available for underground as well as above-ground tanks. Steel oil tanks don’t also cost a lot of money.


Extremely strong tanks are those made out of the combination. In these tanks, double walls are present in which the inner wall is made out of very thick polyethene composite whereas, outer wall is made out of galvanized steel. Together both walls keep the tank robust. Combination oil tanks are highly expensive because of its construction, safety and reliability.

Home Oil Tanks Installation

Firstly, you would have to make a choice: Do you either want an underground oil tank or an above-ground oil tank? You can also take advice from the pros as they would keep in mind all the technical requirements before installation. Home oil tanks should be installed or replaced by experts only unless you perfectly know the job.

There are several precautions to make and things to care about while installing the home oil tank which is why it is best to leave the task for the pros to handle.

Check Your Oil Tank Regularly

If you have gotten your oil tanks installed a couple of years ago and haven’t got it repaired since then, the tank would now be highly vulnerable to leakages and damages. In order to keep your oil tank work super efficiently, get it checked by oil tank replacement services Long Island. Sometimes, in extreme weather, oil burners stop working or work inefficiently hence, oil burner services should be called over for help.